PRIOR-DESIGN PD-M1 Widebody Aerodynamic-Kit for Bmw 3-Series [E92/E93] - PRIOR-DESIGN North America

Prior Design Products

Exclusive Aerodynamics & Wheels | Made in Germany

PRIOR-DESIGN PD-M1 Widebody Aerodynamic-Kit for Bmw 3-Series [E92/E93]

PRODUCT GALLERY

INFO

This product is made from high-quality FRP (Fiber Reinforced Plastic). The material is a unique blend of epoxy and flex resin that gives excellent strength, flexibility, and lightweight.    All of our parts are designed and developed in Germany to the highest quality standards.  Fit and finish is excellent, which provides for a seamless installation with one of our Authorized Installation Facilities.  Please contact us for more details.

Fits all BMW 3-Series E92 | E93 Models (excluding M3) to facelift.

If your car is a model after facelift, the front bumper can not be mounted due to changed headlights. The tailgate & roof spoiler is only suitable for e92 Coupé models. On vehicles with PDC, recesses in the bumper must be prepared to mount the PDC sensors. On vehicles with existing SRA, the existing headlight cleaning system can be adapted to the front bumper. For this purpose, the pre-marked recesses must also be cut out and glued the headlight cleaning system in the front bumper. The recesses in the fenders are the same as the original M3 fenders, so you should ideally use original BMW M3 gills / indicators. In addition, it is important to note that the original water tank must be replaced with a smaller original M3 water tank. For convertible models, the control unit under the mudguard must be moved. To mount the bonnet, the original hinges of the standard bonnet must be taken over. The insulating mat can be recessed in the area of the front air inlets. The air intakes right and left are identical to those of the original M3 bonnet, so ideally the original BMW M3 air intakes are to be used. Using a standard / non-M3 style exhaust system may result in minor adjustments to the ESD or rear bumper. This can be recessed by the buyer depending on the exhaust position. An assembly of fog lights is not intended like the original BMW M3. These can be adapted to further desired use by fog lights shots in the front bumper. If fog lights were previously available and should no longer be installed, they can be disabled by BMW when the error message appears via the software or blinded by resistance.

Note:

Front Bonnet in BMW E93 335 diesel model needs to be adapted.
When converting the PD-M1 Widebody kit the original M3 windshield washer fluid tank is needed.
Also note that the wheel arches and possibly the front fenders must be cut out.

PACKAGE CONTENTS

Complete PD-M1 Widebody Aerodynamic-Kit package includes:

PD-M1 WB Front Bumper

prior-design_pdm1_front-bumper_for_bmw_3series_e92e93

PD-M WB Rear Bumper

prior-design_PD-M_rear-bumper_for_bmw_3series_E92coupe

PD-M WB Side Skirts

 

prior-design_PD-M_side-skirts_for_bmw_3series_E92coupe

PD-M WB Front Fenders

 

prior-design_PD-M_front-fenders_for_bmw_3series_E92coupe

PD-M WB Rear Widenings

 

prior-design_PD-M_rear-widenings_for_bmw_3series_E92coupe

Optional parts not included in PD-M1 Widebody Aero-kit

PD-M Hood w/o Vents

prior-design_PD-M_bonnet-engine_cover_for_bmw_3series_E92coupe

PD Hood w/Vents

prior-design_PD-M_vented_bonnet-engine_cover_for_bmw_3series_E92coupe

PD Roof Spoiler

prior-design_PD-M_roof-spoiler_for_bmw_3series_E92coupe

PD Rear Trunk Spoiler

prior-design_PD-M_rear-trunk-spoiler_for_bmw_3series_E92coupe

PRODUCT TABLE

Product NameArt. IDPrice incl. VATTÜVImage
PD-M1 Widebody Aerodynamic-Kit suitable for BMW 3-Series E92/E93 (except M3).

Includes:
PD-M1 WB Front Bumper
PD-M WB Rear Bumper
PD-M WB Side Skirts
PD-M WB Front Fenders
PD-M WB Rear Widenings
Mounting material


REQUEST QUOTE

4260609890839Price on request-

OPTIONAL:

PRIOR-DESIGN PD-M Hood w/o Vents for Bmw 3-Series [E92]

REQUEST QUOTE
4260609890778Price on request+
OPTIONAL:

PRIOR-DESIGN PD Hood w/Vents for Bmw 3-Series [E92]

REQUEST QUOTE
4260609890785Price on request+
OPTIONAL:

PRIOR-DESIGN Rear Trunk Spoiler for Bmw 3-Series [E92]

REQUEST QUOTES
4260609890792Price on request+
OPTIONAL:

PRIOR-DESIGN Roof Spoiler for Bmw 3-Series [E92]

REQUEST QUOTES
4260609890808Price on request+

INTERIOR

prior-design_exclusive_custom_interior_MAIN2

PRIOR-DESIGN Exclusive Custom Interior is available on request.

REQUEST QUOTE

EXHAUST SYSTEMS

exhaust

PRIOR-DESIGN Exhaust System is available on request.

REQUEST QUOTE

PRIOR-DESIGN WHEELS

Available in 20 inches

9x20 ET40 / 10.5x20 ET 40

Different colors available

See more

felgi_UP

SUSPENSION

suspension_bmw

PRIOR-DESIGN Suspension-Kits are available on request.

REQUEST QUOTE

OPTIONAL

paint installation

Paint and installation at our facility is possible. Please contact us for details.